Reelcraft Display Stand Manuel d'utilisateur télécharger pdf

Operating Instructions

Display Stand

Model Numbers:

Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725

Ph: 800-444-3134 / 260-248-8188 • Fax: 800-444-4587 / 260-248-2605

Customer Service: 855-634-9109 • [email protected] • www.reelcraft.com

Form# 1173-705 Rev: 6/2013

S602037-1 S602037-2 S602037-3

INSTALLATION INSTRUCTIONS

Step 1:

Preassemble twelve of the 45° corner

brackets (#10) with four hex cap screws

(#12) and four Nyloc lock nuts (#14),

each side of the corner bracket (#10)

gets one screw in the slot and one

screw in the hole. See figure 1.

Step 2:

Gather the 20° front legs (#4). Slide one

of the preassembled corner brackets (#10)

into the front leg (#4), by sliding the nuts

into the slot of the leg. Position the bracket

(#10) with the back edge flush with the

end of the leg. Tighten the two screws to

secure the bracket to the leg. (See figures

2 & 3). Repeat process of the second leg

(#4).

Step 3:

Gather the two uprights (#2) and slide

the nuts from the preassembled corner

bracket (#10) and front leg (#4) into the

slot of the upright (#2). Position the

upright (#2) and leg (#4) so that the

bottom of the upright (#2) is flush with

the bottom of the front leg (#4). Tighten

the two screws to secure the bracket to

the upright (see figure 4). Repeat process

for the second upright (#2).

Step 4:

Gather the two cross bars with access

holes (#8) and four preassembled

corner brackets (#10). Slide a corner

bracket (#10) into each end of the cross

bar (#8) locating the nuts of the corner

brackets (#10) into the slot of the side

directly above the access holes. Posi-

tion the corner brackets (#10) so that the

outside edge of each corner bracket (#10)

is flush with the end of the cross bar (#8).

See figures 5 and 6. Repeat process for the

second cross bar with access holes (#8).

Tools Required:

Socket wrench

Socket wrench extension

1/2” socket

Tape measure or 12” ruler

Figure 1

Figure 2

Figure 3

Figure 4

Figure 5

Figure 6

1 2 3 4 5 6

Résumé du contenu

Page 1 - Operating Instructions

Operating InstructionsDisplay StandModel Numbers:Reelcraft Industries, Inc. • 2842 E Business Hwy 30, Columbia City, IN 46725Ph: 800-444-3134 / 260-

Page 2

Step 5:Gather the two remaining cross bars (#3) and four preassembled corner brackets (#10). Slide a corner bracket (#10) into each end of the cross b

Page 3

Reelcraft Display Standwww.reelcraft.comPage 3Step 12:Slide the bottom left side preassembled support bracket (#7) into one of the 45°supports (#6) as

Page 4

Step 19:Gather four of the end caps (#11) and at-tach them to the ends of both of the front legs (#4) and the back legs (#5) (see figure 21).Step 20:S

Page 5 - Reelcraft Display Stand

Reelcraft Display Standwww.reelcraft.comPage 5

Page 6 - Parts List

NO. S602037-1 S602037-2 S602037-3 PART# DESCRIPTION1 8 6 4 261918-37 Plate, Display Stand Adapter2 2 2 2 261919 Upright3 2 0 0 261920-1 Cross Bar3 0 2

Commentaires sur ces manuels

Pas de commentaire

Reelcraft Display Stand Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Matériel Reelcraft Display Stand. Reelcraft Display Stand User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Matériel Reelcraft Display Stand